 |
产品使用说明书 04.05.2007 |
|||||||||||||||||||||
Temathane PC 80 |
 |
|||||||||||||||||||||
| 描述 | A high-solids two component, glossy polyurethane paint, hardener aliphatic isocyanate. | |||||||||||||||||||||
| 产品特性 | Recommended as a glossy topcoat for epoxy systems exposed to weathering. | |||||||||||||||||||||
| 推荐用途 | Recommended for painting of storage tank exterios, steel buildings and other steelwork. | |||||||||||||||||||||
| 技术参数 | ||||||||||||||||||||||
| 特性 | Excellent weathering and abrasion resistance. A durable, easy to clean and non-chalking topcoat with good gloss and colour retention. | |||||||||||||||||||||
| 色卡 | RAL, NCS, SSG, BS, MONICOLOR NOVA and SYMPHONY colour cards. TEMASPEED tinting. | |||||||||||||||||||||
| 光泽组别 | 光 | |||||||||||||||||||||
| 涂布率 |
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated. |
|||||||||||||||||||||
| 稀释剂 | , | |||||||||||||||||||||
| 混合比例 | Base 5 parts by volume 524-series
Hardener 1 part by volume 008 7690 |
|||||||||||||||||||||
| 涂刷方法 | By airless or conventional spray. | |||||||||||||||||||||
| 适用期 | 1½ hours | |||||||||||||||||||||
| 干燥时间 |
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation. |
|||||||||||||||||||||
| Solids volume | 66 ± 2 % volume (ISO 3233)
77 ± 2 % weight |
|||||||||||||||||||||
| 密度 | 1.3 ± 0.1 kg / l (mixed) | |||||||||||||||||||||
| 产品编号 | 524-series | |||||||||||||||||||||
| 使用说明 | ||||||||||||||||||||||
| 施工条件 | All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below + 5 ºC during application or drying. Relative humidity should not exceed 80 %. The surface temperature of the steel should remain at least 3 ºC above the dew point. | |||||||||||||||||||||
| 准备 | Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4) | |||||||||||||||||||||
| 涂刷底漆 | TEMACOAT GPL-S PRIMER, TEMACOAT GF PRIMER, TEMACOAT HB PRIMER, TEMABOND, TEMACOAT RM 40, TEMACOAT SPA, TEMADUR 20, TEMADUR PRIMER, TEMAPRIME GF, FONTECOAT EP PRIMER and FONTECRYL 10. | |||||||||||||||||||||
| 喷面漆 | TEMATHANE and TEMADUR. | |||||||||||||||||||||
| 涂刷 | By airless or conventional spray. In order to obtain an even, non-porous finish, spray a misty coat: first a thin layer, then let the solvents evaporate for 5 - 30 minutes and then apply the full coat. Depending on the application method and the termperature of the components (base, hardener, thinner) the paint can be thinned 0 - 15 %. Airless spray nozzle tip 0.011" - 0.013" and nozzle pressure 120 - 160 bar. Spray angle shall be chosen according to the shape of the object. | |||||||||||||||||||||
| 表面处理 | First stir base and hardener separately. The correct proportions of base and hardener must be mixed thoroughly before use. Use Temaspeed Squirrel Mixer for mixing. | |||||||||||||||||||||
| 成分混合 | Thinner 1048, 1067 or 1061. | |||||||||||||||||||||
| EU VOC 2004/42/EC-限值 | The Volatile Organic Compounds amount is 320 g/litre of paint mixture
VOC content of the paint mixture (thinned 15 % by volume) is 400 g/l. |
|||||||||||||||||||||
| 健康安全等级 | ||||||||||||||||||||||
| Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy. | ||||||||||||||||||||||
| - | ||||||||||||||||||||||
