 |
产品使用说明书 03.05.2006 |
|||||||||||||||||
Temacryl EA 50 |
 |
|||||||||||||||||
| 描述 | A two component, semigloss, non-isocyanate acrylic finish. | |||||||||||||||||
| 产品特性 | Recommended as a semigloss topcoat for epoxy systems exposed to weathering and/or chemical stress. | |||||||||||||||||
| 推荐用途 | Recommended for storage tank exteriors, steel masts, haulage equipment, structural steel and other steelwork, machinery and equipment. | |||||||||||||||||
| 技术参数 | ||||||||||||||||||
| 特性 | A durable, non-chalking and easy to clean topcoat with good gloss and colour retention. Excellent weathering and abrasion resistance. | |||||||||||||||||
| 色卡 | RAL, NCS, SSG, BS, MONICOLOR NOVA and SYMPHONY colour cards. TEMASPEED tinting. | |||||||||||||||||
| 光泽组别 | 半光 | |||||||||||||||||
| 涂布率 |
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated. |
|||||||||||||||||
| 混合比例 | Base 3 parts by volume 515-series
Hardener 2 parts by volume 008 7650 |
|||||||||||||||||
| 涂刷方法 | By airless or conventional spray. | |||||||||||||||||
| 适用期 | about 30 hours | |||||||||||||||||
| 干燥时间 |
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation. |
|||||||||||||||||
| Solids volume | 50 ± 2 % volume (ISO 3233)
62 ± 2 % weight |
|||||||||||||||||
| 密度 | 1.2 ± 0.1 kg / l (mixed) | |||||||||||||||||
| 产品编号 | 515-series | |||||||||||||||||
| 使用说明 | ||||||||||||||||||
| 施工条件 | All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below + 5 ºC during application or drying. Relative humidity should not exceed 80 %. The surface temperature of the steel should remain at least 3 ºC above the dew point. | |||||||||||||||||
| 准备 | Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4) | |||||||||||||||||
| 涂刷底漆 | TEMACOAT GPL-S PRIMER, TEMACOAT GF PRIMER, TEMACOAT HB PRIMER, TEMACOAT RM 40, TEMABOND, TEMASIL 90, TEMAPRIME EE, TEMAPRIME GF and FONTECRYL 10. | |||||||||||||||||
| 喷面漆 | TEMACRYL EA. | |||||||||||||||||
| 涂刷 | By airless or conventional spray. At airless spray application the paint can be thinned 10 - 20 % to a viscosity of 30 - 60 s DIN4. Airless spray nozzle tip 0.011" - 0.013" and nozzle pressure 120 - 180 bar. Spray angle shall be chosen according to the shape of the object. In order to reach a tight, even finish for spray application a "wet-on-wet" technique is recommended: first a thin coat and after the solvents have evaporated for 5 - 20 minutes the final coat. | |||||||||||||||||
| 成分混合 | First stir base and hardener separately. The correct proportions of base and hardener must be mixed thoroughly before use. Use Temaspeed Squirrel Mixer for mixing. | |||||||||||||||||
| 工具清洗 | Thinner 1048 or 1006. | |||||||||||||||||
| EU VOC 2004/42/EC-限值 | The Volatile Organic Compounds amount is 480 g/litre of paint mixture.
VOC content of paint mixture (thinned 20 % by volume) is 550 g/l. |
|||||||||||||||||
| 健康安全等级 | ||||||||||||||||||
| Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy. | ||||||||||||||||||
| - | ||||||||||||||||||
