Temadur 90

产品使用说明书
31.03.2006

Temadur 90

描述

A two component, glossy polyurethane paint, hardener aliphatic isocyanate.

产品特性

Recommended as a glossy topcoat for epoxy systems exposed to weathering and/or chemical stress.

推荐用途

Recommended for painting of transport and haulage equipment, storage tank exteriors, steel framework and other steel structures, machinery and equipment.

技术参数

特性

Excellent weathering and abrasion resistance. A durable, easy to clean and non-chalking topcoat with good gloss and colour retention.

色卡

RAL, NCS, SSG, BS, MONICOLOR NOVA and SYMPHONY colour cards. TEMASPEED tinting.

光泽组别

全光

涂布率

Recommended film thicknesses		Theoretical coverage
dry	wet
40 µm	75 µm	13.7 m²/l

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.

稀释剂

混合比例

Base 5 parts by volume 115-series
Hardener 1 part by volume 008 7590

涂刷方法

By airless or conventional spray or by brush.

适用期

4 hours

干燥时间

DFT 40 µm	+ 5 ºC	+ 10 ºC	+ 23 ºC	+ 35 ºC
Dust dry, after	45 min	30 min	20 min	10 min
Touch dry, after	12 h	8 h	4 h	2½ h
Recoatable, after	No limitations.

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.

Solids volume

55 ± 2 volume % (ISO 3233)
68 ± 2 weight %

密度

1.2 ± 0.1 kg / l (mixed)

产品编号

115-series

使用说明

施工条件

All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below + 5 ºC during application or drying. Relative humidity should not exceed 80 %. The surface temperature of the steel should remain at least 3 ºC above the dew point.

准备

Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)

涂刷底漆

TEMACOAT GPL-S PRIMER, TEMACOAT GF PRIMER, TEMACOAT HB PRIMER, TEMACOAT PM PRIMER, TEMACOAT GPL-S MIO, TEMACOAT RM 40, TEMACOAT SPA, TEMAMASTIC PM 100, TEMABOND, TEMADUR 20, TEMADUR PRIMER, TEMAPRIME GF, FONTECOAT EP PRIMER and FONTECRYL 10.

喷面漆

TEMADUR and TEMATHANE.

涂刷

By airless or conventional spray or by brush. In order to obtain an even, non-porous finish, spray a misty coat: first a thin layer, then let the solvents evaporate for 5 - 30 minutes and then apply the full coat. Depending on the temperature of the components (base, hardener, thinner) the paint can be thinned 10 - 35 %. The viscosity should be 20 - 25 s DIN4. Airless spray nozzle tip 0.011" - 0.013" and nozzle pressure 120 - 160 bar. Spray angle shall be chosen according to the shape of the object. At brush application the paint should be thinned according to the circumstancies.

成分混合

First stir base and hardener separately. The correct proportions of base and hardener must be mixed thoroughly before use. Use Temaspeed Squirrel Mixer for mixing.

工具清洗

Thinner 1048, 1067 or 1061.

EU VOC 2004/42/EC-限值

The Volatile Organic Compounds amount is 420 g/litre of paint mixture.
VOC content of the paint mixture (thinned 35 % by volume) is 530 g/l.

健康安全等级

Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.

上述信息，基于实验室测试和实际应用而获得，产品使用说明书记载了其被验证有效的日期，我们的生产体系通过了ISO9001和ISO14001认证，可充分保证该产品的质量。对不按使用说明施工和产品用于不当场合所带来的任何损失，作为生产商，我们不会承担任何责任。