Tikkurila worldwide

Temadur Accelerator

Tikkurila Industry 9L
描述 An accelerator solution which makes the curing faster.
产品特性 Used to accelerate the curing of TEMADUR 20, 50 and 90 polyurethane paints and TEMADUR CLEAR varnish. Facilitates early tapeing of painted surfaces. Not suitable for TEMADUR HB polyurethane paints.
推荐用途 -

涂布率 Recommended usage max. 10 vol.-% of the amount of the paint/hardener mixture.
干燥时间 Influence on drying times

Amount of accelerator, + 23 ºC

0 %

5 %

10 %

Pot life

4 h

1 h

½ h


24 h

8 h

4 h

密度 0.9 kg / l
收缩和开裂 990 0746

处理 Mix base and hardener. Add the required amount of accelerator. Thin with Thinner 1048, if necessary, and mix thoroughly. Pay attention to the shortened pot life and start the painting work without delay.

Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy. For professional use only.