Tikkurila worldwide

Temal 600 HB

Tikkurila Industry 9L
描述 A high build silicone aluminium paint.
产品特性 Recommended for exteriors of steel structures exposed to high temperatures.
推荐用途 Suitable for fireplace doors, flues, exhaust pipes, sauna stoves and other hot metal surfaces.

特性 Resistant to temperatures up to + 650 ºC dry heat on steel without primer and + 400 ºC when applied over a zinc silicate paint. Can be applied by airless spray equipment.
色彩类别 Aluminium. Metallic lustre.

Recommended film thicknesses

Theoretical coverage




25 µm

75 µm

13.3 m2/l

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
涂刷方法 By airless or conventional spray or by brush.

DFT 25 µm

+ 10 ºC

+ 23 ºC

+ 35 ºC

Dust dry, after

30 min

15 min

10 min

Touch dry, after

2 h

1 h

30 min

Recoatable, after

3 h

2 h

1 h

Final cure and hardness will be obtained by curing at + 230 ºC.

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Solids volume 34 ± 2 % volume (ISO 3233)
51 ± 2 % weight
密度 1.2 kg / l
产品编号 006 7682

施工条件 All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below + 5 ºC during application. Relative humidity should not exceed 80 %. The surface temperature of the steel should remain at least 3 ºC above the dew point.
准备 Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4)

Steel surfaces: Blast clean to grade Sa2½. (ISO 8501-1) If blast cleaning is not possible, phosphating is recommended for cold rolled steel to improve adhesion.

Zinc silicate surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the over-coating time of the primer. (ISO 12944-4)
涂刷底漆 TEMASIL 90.
喷面漆 TEMAL 600 HB.
涂刷 By airless or conventional spray or by brush. Mix the paint thoroughly before use. Depending on the application method the paint can be thinned 0 - 10 %. Airless spray nozzle tip 0.011" - 0.013" and nozzle pressure 120 - 160 bar. Spray angle shall be chosen according to the shape of the object.
工具清洗 Thinner 1006.
EU VOC 2004/42/EC-限值 The Volatile Organic Compounds amount is 565 g/litre of paint.
VOC of the paint (thinned 10 % by volume) is 595 g/l.

Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.