Tikkurila worldwide
产品使用说明书
02.05.2006

Temalac AB 70

 
Tikkurila Industry 9L
描述 A one component glossy alkyd topcoat.
产品特性 A glossy alkyd based topcoat for metal surfaces indoors and outdoors. Good gloss and colour retention also in industrial climate. Application also by brush. Can also be used on wood.
推荐用途 Recommended especially for on-site painting of bridges, storage tank exteriors, structural steel and other steel surfaces.

技术参数
色卡 RAL, NCS, SSG, BS, MONICOLOR NOVA and SYMPHONY colour cards. TEMASPEED tinting.
光泽组别
涂布率

Recommended film thicknesses

Theoretical coverage

dry

wet

 

40 µm

80 µm

13.0 m2/l

60 µm

115 µm

8.7 m2/l


Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated
涂刷方法 By airless or conventional spray or by brush.
干燥时间

DFT 50 µm

+ 10 ºC

+ 23 ºC

+ 35 ºC

Dust dry, after

6 h

3 h

2 h

Touch dry, after

10 h

6 h

4 h

Recoatable, after

48 h

24 h

16 h


Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Solids volume 52 ± 2 volume % (ISO 3233)
67 ± 2 weight %
密度 1.1 - 1.2 kg / l depending on colour.
产品编号 610-series

使用说明
施工条件 All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below + 5 ºC during application and drying. Relative humidity should not exceed 80 %. The surface temperature of the steel should remain at least 3 ºC above the dew point.
准备 Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)
涂刷底漆 TEMAPRIME AB, TEMAPRIME EE, TEMAPRIME EUR, TEMAPRIME GF, TEMAPRIME ML and FONTECRYL 10.
喷面漆 TEMALAC AB 70.
Note! Use of Thinner 1006 is recommended when overcoating on TEMAPRIME EE, EUR, GF and ML.
涂刷 By airless or conventional spray or by brush. Mix the paint thoroughly before use. At airless spray application the paint should be thinned 0 - 15 %. Airless spray nozzle tip 0.011" - 0.015" and nozzle pressure 120 - 160 bar. Spray angle shall be chosen according to the shape of the object. At conventional spray application the paint should be thinned 20 - 25 %.
工具清洗 Thinner 1054 or Thinner 1006.
EU VOC 2004/42/EC-限值 The Volatile Organic Compounds amount is 400 g/litre of paint.
VOC content of the paint (thinned 25 % by volume) is 496 g/l.

健康安全等级
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.
 
-


返回