 |
产品使用说明书 02.01.2006 |
|||||||||||||||||
Temalac FD 20 |
 |
|||||||||||||||||
| 描述 | A fast drying, one component semimatt anti-corrosive single coat alkyd paint. | |||||||||||||||||
| 产品特性 | Recommended to be used as a single coat system for steel surfaces. Good application properties. Ideal for use in machine shops with fast production cycles. May also be used as a primer in alkyd based paint systems. | |||||||||||||||||
| 推荐用途 | Steel surfaces. | |||||||||||||||||
| 技术参数 | ||||||||||||||||||
| 色卡 | RAL, NCS, SSG, BS, MONICOLOR NOVA and SYMPHONY colour cards. TEMASPEED tinting. | |||||||||||||||||
| 光泽组别 | 半哑光 | |||||||||||||||||
| 涂布率 |
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated. |
|||||||||||||||||
| 涂刷方法 | By airless spray. | |||||||||||||||||
| 干燥时间 |
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation. |
|||||||||||||||||
| Solids volume | 50 ± 2 % volume (ISO 3233)
64 ± 2 % weight |
|||||||||||||||||
| 密度 | 1.1 - 1.3 kg / l depending on colour | |||||||||||||||||
| 产品编号 | 184-series | |||||||||||||||||
| 使用说明 | ||||||||||||||||||
| 施工条件 | All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below + 5 ºC during application or drying. Relative humidity should not exceed 80 %. The surface temperature of the steel should remain at least 3 ºC above the dew point. | |||||||||||||||||
| 准备 | Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4)
Steel surfaces: Blast clean to grade Sa2½. (ISO 8501-1) If blast cleaning is not possible, phosphating is recommended for cold rolled steel to improve adhesion. Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4) |
|||||||||||||||||
| 涂刷底漆 | TEMALAC FD 20, TEMAPRIME EE, TEMAPRIME EUR, TEMAPRIME GF and TEMAPRIME ML. | |||||||||||||||||
| 喷面漆 | TEMALAC FD 20, TEMALAC FD 50, TEMALAC FD 80, TEMALAC AB 70 and TEMALAC ML 90. | |||||||||||||||||
| 涂刷 | By airless spray. Mix the paint thoroughly before use. At airless spray application the paint should be thinned 5 - 15 %. Airless spray nozzle tip 0.011" - 0.015" and nozzle pressure 120 - 180 bar. Spray angle shall be chosen according to the shape of the object. For large surfaces use Thinner 1053 (slow). | |||||||||||||||||
| 工具清洗 | Thinner 1006. | |||||||||||||||||
| EU VOC 2004/42/EC-限值 | The Volatile Organic Compounds amount is 440 g/litre of paint.
VOC content of the paint (thinned 15 % by volume) is 495 g/l. |
|||||||||||||||||
| 健康安全等级 | ||||||||||||||||||
| Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy. | ||||||||||||||||||
| - | ||||||||||||||||||
