Tikkurila worldwide
产品使用说明书
02.01.2006

Temalac FD 80

 
Tikkurila Industry 9L
描述 A fast drying, one component glossy alkyd topcoat.
产品特性 A glossy, alkyd based topcoat for steel surfaces. Excellent gloss and colour retention when exposed to weathering. Ideal for use in machine shops with fast production cycles and in the field. Suitable also for electrostatic painting.
推荐用途 Recommended for steel structures, service platforms and different types of machinery and equipment.

技术参数
色卡 RAL, NCS, SSG, BS, MONICOLOR NOVA and SYMPHONY colour cards. TEMASPEED tinting.
光泽组别
涂布率

Recommended film thicknesses

Theoretical coverage

dry

wet

 

40 µm

90 µm

11.1 m2/l

60 µm

135 µm

7.4 m2/l


Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
涂刷方法 Airless or conventional spray.
干燥时间

DFT 40 µm

+ 10 ºC

+ 23 ºC

+ 35 ºC

Dust dry, after

40 min

15 min

10 min

Touch dry, after

3 h

1½ h

1 h

Recoatable, after

12 d

6 d

4 d

Recoatable, "wet-on-wet", after

1 - 4 h

½ - 2 h

30 min


Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Solids volume 45 ± 2 % volume (ISO 3233)
62 ± 2 % weight
密度 1.0 - 1.2 kg / l depending on colour
产品编号 180-series

使用说明
施工条件 All surfaces must be dry. The temperature of the ambient air, surface and paint should not fall below + 5 ºC during application and drying. Relative humidity should not exceed 80 %. The temperature of the substrate should remain at least 3 ºC above the dew point.
准备 Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)
涂刷底漆 TEMAPRIME EE, TEMAPRIME EUR, TEMAPRIME GF, TEMAPRIME ML and FONTECRYL 10.
喷面漆 TEMALAC FD 80.
涂刷 Airless or conventional spray. Mix the paint thoroughly before use. With airless spray the paint should be thinned 15 - 20 % to a viscosity of 30 - 40 s DIN 4. Airless spray nozzle tip 0.011" - 0.015" and nozzle pressure 120 - 180 bar. Spray angle shall be chosen according to the shape of the object. At conventional spray the paint should be thinned 20 - 30 % to a viscosity of 20 - 25 s DIN 4. "Wet-on-wet" spraying technique is recommended. For large surfaces use Thinner 1053 (slow).
工具清洗 Thinner 1006.
EU VOC 2004/42/EC-限值 The Volatile Organic Compounds amount is 470 g/litre of paint.
Maximum VOC content in ready to use paint (thinned 30 % by volume) is 560 g/l.

健康安全等级
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.
 
-


返回