Temalac ML 90

产品使用说明书
24.04.2006

Temalac ML 90

描述

A high gloss, one component alkyd topcoat.

产品特性

High gloss alkyd topcoat for steel surfaces. Can be applied using a "wet-on-wet" painting technique. Suitable for industrial finishing.

推荐用途

Recommended uses: small tanks, agricultural machinery, haulage equipment and other machinery and equipment.

技术参数

特性

Good gloss and colour retention when exposed to weathering.

色卡

RAL, NCS, SSG, BS, MONICOLOR NOVA and SYMPHONY colour cards. TEMASPEED tinting.

光泽组别

全光

涂布率

Recommended film thicknesses		Theoretical coverage
dry	wet
40 µm	90 µm	11.2 m²/l
60 µm	135 µm	7.5 m²/l

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.

涂刷方法

By airless or conventional spray or by brush.

干燥时间

DFT 40 µm	+ 10 ºC	+ 23 ºC	+ 35 ºC
Dust dry, after	2 h	1 h	½ h
Touch dry, after	8 h	5 h	3 h
Recoatable, after	36 h	24 h	16 h
Recoatable, "wet-on-wet", after		½ - 1 h
Touch dry 1 h / 60 ºC, ½ h / 80 ºC

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.

Solids volume

45 ± 2 volume % (ISO 3233)
57 ± 2 weight %

密度

0.9 - 1.1 kg / l depending on colour.

产品编号

513-series

使用说明

施工条件

By airless or conventional spray or by brush. Mix the paint thoroughly before use. At airless spray the paint should be thinned 0 - 10 % to a viscosity of 30 - 60 s DIN 4. Airless spray nozzle tip 0.011" - 0.015" and nozzle pressure 140 - 180 bar. Spray angle shall be chosen according to the shape of the object. At conventional spray the paint should be thinned 20 - 30 %. The best finish is obtained using a "wet-on-wet" technique, with 5 - 30 minutes evaporating pauses.

准备

Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)

涂刷底漆

TEMAPRIME EE, TEMAPRIME EUR, TEMAPRIME GF, TEMAPRIME ML and FONTECRYL 10.

喷面漆

TEMALAC ML 90.

涂刷

工具清洗

Thinner 1006 or Thinner 1054.

EU VOC 2004/42/EC-限值

The Volatile Organic Compounds amount is 460 g/litre of paint.
VOC content of the paint (thinned 30 % by volume) is 550 g/l.

健康安全等级

Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.

上述信息，基于实验室测试和实际应用而获得，产品使用说明书记载了其被验证有效的日期，我们的生产体系通过了ISO9001和ISO14001认证，可充分保证该产品的质量。对不按使用说明施工和产品用于不当场合所带来的任何损失，作为生产商，我们不会承担任何责任。