Tikkurila worldwide

Temaline LP Primer

Tikkurila Industry 9L
描述 A two component, amine adduct cured epoxy paint.
产品特性 Resistant to splashes and immersion in water and chemicals. Used as a primer and an intermediate coat in epoxy systems inside kerosene and oil tanks. Warning! Not recommended for leadfree petrol tanks. May also be used as a primer in other epoxy paint systems.
推荐用途 Inside kerosene and oil tanks.

特性 Withstands immersion in neutral mineral solutions, vegetable and animal fats and oils.
色彩类别 Light grey and reddish brown.
光泽组别 半光

Recommended film thicknesses

Theoretical coverage




70 µm

120 µm

8.6 m2/l

125 µm

210 µm

4.8 m2/l

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
混合比例 Base 4 parts by volume 008 6965, 008 6966
Hardener 1 part by volume 008 6969
涂刷方法 By airless spray or brush.
适用期 8 hours

DFT 100 µm

+ 10 ºC

+ 23 ºC

+ 35 ºC

Dust dry, after

8 h

4 h

2 h

Touch dry, after

12 h

6 h

3 h

Recoatable without sanding, min/max. after

32 h - 12 d

16 h - 6 d

8 h - 2 d

Fully cured, after

14 d

7 d

3 d

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Solids volume 60 ± 2 % volume (ISO 3233)
70 ± 2 % weight
密度 1.4 kg / l (mixed)
产品编号 008 6965, 008 6966

施工条件 All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below +10 ºC during application and drying. Relative humidity should not exceed 80 %. The surface temperature of the steel should remain at least 3 ºC above the dew point.
准备 Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4)

Steel surfaces: Blast clean to grade Sa2½. (ISO 8501-1)

Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)
涂刷 By airless spray or brush. If necessary, the paint can be thinned 5 - 20 %. Airless spray nozzle tip 0.015" - 0.021" and nozzle pressure 120 - 180 bar. Spray angle shall be chosen according to the shape of the object.
成分混合 First stir base and hardener separately. The correct proportions of base and hardener must be mixed thoroughly before use. Use Temaspeed Squirrel Mixer for mixing.
工具清洗 Thinner 1031.
EU VOC 2004/42/EC-限值 The Volatile Organic Compounds amount is 450 g/litre of paint.
VOC content of the paint mixture (thinned 20 % by volume) is 531 g/l.

Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.