Tikkurila worldwide

Temaprime AB

Tikkurila Industry 9L
描述 A one component anti-corrosive pigmented alkyd primer.
产品特性 A white spirit based alkyd primer for interior and exterior steel surfaces. Can also be applied by brush. Recommended especially for on-site painting and for repairing surfaces painted with alkyd systems.
推荐用途 Steel surfaces.

色卡 Reddish brown (006 7450) and grey (006 7451).
光泽组别 哑光

Recommended film thicknesses

Theoretical coverage




40 µm

80 µm

13.0 m2/l

60 µm

115 µm

8.7 m2/l

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
涂刷方法 By airless or conventional spray or by brush.

DFT 50 µm

+ 10 ºC

+ 23 ºC

+ 35 ºC

Dust dry, after

4 h

1 h

50 min

Touch dry, after

10 h

4 h

3 h

Recoatable, after

48 h

16 h

12 h

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Solids volume 52 ± 2 % volume (ISO 3233)
70 ± 2 % weight
密度 1.3 kg / l
产品编号 006 7450 and 006 7451

施工条件 All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below +5 ºC during application or drying. Relative humidity should not exceed 80 %. The surface temperature of the steel should remain at least 3 ºC above the dew point.
准备 Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4)

Steel surfaces: Remove rust by power tool cleaning to St2, preferably blast clean to grade Sa2½. (ISO 8501-1) If blast cleaning is not possible, phosphating is recommended for cold rolled steel to improve adhesion.

Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)
涂刷 By airless or conventional spray or by brush. Mix the paint thoroughly before use. At airless spray application the paint can be thinned 0 - 10 %, at conventional spray application 20 - 25 %. Airless spray nozzle tip 0.011" - 0.015" and nozzle pressure 120 - 180 bar. Spray angle shall be chosen according to the shape of the object.
工具清洗 Thinner 1054 or Thinner 1006.
EU VOC 2004/42/EC-限值 The Volatile Organic Compounds amount is 380 g/litre of paint.
VOC content of the paint (thinned 25 % by volume) is 469 g/l.

Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.