Tematherm AA 90

产品使用说明书
03.01.2006

Tematherm AA 90

描述

A one component alkyd amino resin based stoving enamel.

产品特性

A stoving enamel for metal industry. Suitable for steel, aluminium and zinc surfaces in interior premises.

推荐用途

Used for painting lighting fixtures, trim panels and boards, metal furniture, household appliances and other equipment and machines.

技术参数

特性

Good gloss and colour retention. Available also in metallic shades. The product has MED (Marine Equipment Directive) certificate no 0809-MED-0355 and is thus accepted for painting surfaces inside the ships.

色卡

RAL, NCS, SSG, BS, MONICOLOR NOVA and SYMPHONY colour cards. TEMASPEED tinting.

光泽组别

光

涂布率

Recommended film thicknesses		Theoretical coverage
dry	wet
30 µm	60 µm	16.7 m²/l
40 µm	80 µm	12.5 m²/l

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.

涂刷方法

By spray, dip or flow coating.

干燥时间

DFT 40 µm	+ 150 ºC	+ 160 ºC
Dry, after	20 min	15 min

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.

Solids volume

50 ± 2 % volume (ISO 3233)

密度

1.0 - 1.2 kg / l depending on colour.

产品编号

639-series

使用说明

准备

Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4)

Phosphating and chromating improve adhesion and reduce corrosion under the paint film.

Steel surfaces: Iron or zinc phosphating.
Zinc surfaces: Zinc phosphating.
Aluminium surfaces: Chromating.

处理

By spray, dip or flow coating. Stir the paint thoroughly before use. For cold airless spraying, conventional spraying and dip or flow coating the paint should be thinned 20 vol-% to a viscosity of 20 - 25 s DIN 4 / 20 ºC. At conventional spraying also Dicco Thinner 1020 can be used. For hot airless spraying the paint should be thinned to a viscosity of 70 s DIN 4 / 20 ºC. Airless spray nozzle tip 0.009" - 0.013" and nozzle pressure 120 - 160 bar. Spray angle shall be chosen according to the shape of the object.

Stoving: The solvents should be allowed to flash off for a minimum of 10 minutes before stoving. Minimum stoving temperature is 150 ºC. Recommended stoving time, see page 1. Stoving time is dependent on the metal thickness, especially in convection ovens. The optimum stoving time and temperature for each oven and product can only be determined through experimentation.

工具清洗

Thinner 1006.

EU VOC 2004/42/EC-限值

The Volatile Organic Compounds amount is 430 g/litre of paint.
VOC content of the paint (thinned 20 % by volume) is 495 g/l.

健康安全等级

Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.

上述信息，基于实验室测试和实际应用而获得，产品使用说明书记载了其被验证有效的日期，我们的生产体系通过了ISO9001和ISO14001认证，可充分保证该产品的质量。对不按使用说明施工和产品用于不当场合所带来的任何损失，作为生产商，我们不会承担任何责任。