Tikkurila worldwide
产品使用说明书
16.10.2007

Temaweld ZSM

 
Tikkurila Industry 9L
描述 A two component modified zinc silicate shop primer.
产品特性 Used for automatic shop priming of blasted steel material.
推荐用途 Blasted steel surfaces.

技术参数
特性 Does not affect on welding, gas cutting or other working processes in steel shop. Excellent resistance to abrasion, heat and weathering. The product is found to comply with: Det Norske Veritas´ Offshore Standards, Det Norske Veritas´ Rules for Classification of Ships and Det Norske Veritas´ Type Approval Programme 1-602.2, 1999, Shop Primers for Corrosion Protection of Steel Plates and Sections. The shop primer is approved for application on blast cleaned steel plates and sections. For industrial use only according to Directive 1999/13/EC.
色彩类别 Grey.
光泽组别 哑光
涂布率

Recommended film thicknesses

Theoretical coverage

dry

wet

 

15 µm

55 µm

18.7 m2/l


Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
混合比例 Base 6 parts by volume 008 7321
Hardener 10 parts by volume 008 7325
涂刷方法 By automatic painting machine or spray.
适用期 24 hours
干燥时间

Touch dry after            1 - 2 min

Recoatable after          1  week

 

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Solids volume 28 ± 2 % volume
56 ± 2 % weight
密度 1.4 kg / l (mixed)
产品编号 008 7321

使用说明
施工条件 All the surfaces must be dry. The surface temperature of the steel should remain at least 3 ºC above the dew point.
准备 Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4)

Steel surfaces: Blast clean to grade Sa2½ - 3. (ISO 8501-1)
喷面漆 Can be overcoated by all types of paints except zinc rich paints.
涂刷 By automatic painting machine or spray. Depending on the application method the paint can be thinned 0 - 20 % to a viscosity of 13 - 15 s DIN 4/20 ºC. Airless spray nozzle tip 0.018" and nozzle pressure 120 - 180 bar. Spray angle shall be chosen according to the shape of the object.
成分混合 First stir base and hardener separately. The correct proportions of base and hardener must be mixed thoroughly before use. Use Temaspeed Squirrel Mixer for mixing.
工具清洗 Thinner 1029.
EU VOC 2004/42/EC-限值 The Volatile Organic Compounds amount is 570 g/litre of paint.
VOC content of the paint mixture (thinned 20 % by volume) is 620 g/l.

健康安全等级
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.
 
-


返回