Tikkurila worldwide
产品使用说明书
28.12.2005

Fontecryl 10 Dipp

 
Tikkurila Industry 9L
描述 A waterborne, one component fast drying acrylic based paint which contains active anticorrosive pigments.
产品特性 Suitable for dipping, flow coating and conventional spray application. Overcoatable with a wide range of products, also with solventborne products. Not suitable for immersion or constant humidity. Drying times can be shortened by using higher temperatures.
推荐用途 Steel surfaces.

技术参数
色彩类别 Green RAL 6029, red TVT 4000, black TVT 4003 and brown RAL 8019.
光泽组别 哑光
涂布率

Recommended film thicknesses

Theoretical coverage

dry

wet

 

30 µm

70 µm

14.0 m2/l

50 µm

120 µm

8.4 m2/l


Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
稀释剂
涂刷方法 Dip, flow coating or convential spray.
干燥时间

DFT 40 µm

+ 15 ºC

+ 23 ºC

+ 35 ºC

Dust dry, after

30 min

20 min

10 min

Touch dry, after

6 h

1 - 2 h

20 min

Recoatable, after

24 h

2 - 3 h

1 h

Recoatable with solvent borne polyurethane paints, after

 

6 h

4 h


Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Solids volume 42 ± 2 % volume (ISO 3233)
52 ± 2 % weight
密度 1.2 - 1.3. kg / l depending on colour.
产品编号 960 2438, 960 1825, 960 1836, 960 2177

使用说明
施工条件 All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below +15 ºC during application or drying. Relative humidity should be between 20 - 70 %. The surface temperature of the steel should remain at least 3 ºC above the dew point.
准备 Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4)

Steel surfaces: Blast clean to grade Sa2½. (ISO 8501-1) If blast cleaning is not possible, phosphating is recommended for cold rolled steel to improve adhesion.
涂刷底漆 FONTECRYL 10 DIPP.
保护涂层 After 2 - 3 hours: FONTECRYL 25, FONTECRYL 50, FONTELAC 90, FONTELAC QD 80, FONTECOAT EP 50, FONTECOAT EP 80, FONTEDUR 90, TEMALAC FD 50, TEMALAC FD 80 and TEMALAC ML 90.
After 6 hours: TEMADUR, TEMALUX, TEMATHANE and TEMACRYL.
涂刷 Dip, flow coating or convential spray application. Depending on the application method the paint can be thinned 0 - 5 %.
工具清洗 Water or FONTECLEAN 1921. The equipment must be cleaned immediately after use before the paint dries.
EU VOC 2004/42/EC-限值 The Volatile Organic Compounds amount is 100 g/litre of paint.
VOC content of paint (thinned 5 % by volume) is 95 g/l.

健康安全等级
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.
 
-


返回