Fontecryl 50
|
|
描述 |
A waterborne, one component semigloss acrylic based topcoat. |
产品特性 |
Suitable for use in product painting in metal industry and painting stations. Good gloss and colour retention in climatic stress. Not suitable for immersion or constant humidity. |
推荐用途 |
Recommended for topcoating steel frameworks, various machinery and equipment indoors and outdoors. |
|
技术参数 |
色卡 |
TEMASPEED FONTE tinting. |
光泽组别 |
半光 |
涂布率 |
Recommended film
thicknesses
|
Theoretical
coverage
|
dry
|
wet
|
|
40 µm
|
95 µm
|
10.7 m2/l
|
60
µm
|
140
µm
|
7.2
m2/l
|
Practical
coverage depends on the application method, painting conditions and the shape
and roughness of the surface to be coated.
|
稀释剂 |
水 |
涂刷方法 |
By
spray, brush or dipping. |
干燥时间 |
DFT 50 µm
|
+ 15 ºC
|
+ 23 ºC
|
+ 60 ºC
|
Dust dry, after
|
20 min
|
15 min
|
5 min
|
Touch dry, after
|
6 h
|
1 h
|
15 min
|
Recoatable, after
|
24 h
|
3 h
|
2 h
|
Drying
and recoating times are related to the film thickness, temperature, the
relative humidity of the air and ventilation.
|
Solids volume |
43 ± 2 volume % (ISO 3233)
50 ± 2 weight %
|
密度 |
1,2 ± 0,1 kg/l . |
产品编号 |
212-series |
|
使用说明 |
施工条件 |
All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below +15 ºC during application or drying. Relative humidity should be between 20 - 70 %. The surface temperature of the steel should remain at least 3 ºC above the dew point. |
准备 |
Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4) |
涂刷底漆 |
FONTECRYL 10, FONTECRYL AP, FONTECRYL 25, TEMAPRIME AB, TEMAPRIME EE, TEMAPRIME EUR, TEMAPRIME GF and TEMAPRIME ML. |
喷面漆 |
FONTECRYL 50. |
涂刷 |
By spray, brush or dipping. Depending on the application method the paint can be thinned 0 - 10 %. Airless spray nozzle tip 0,011" - 0,015" and nozzle pressure 120 - 160 bar. Spray angle shall be chosen according to the shape of the object. |
工具清洗 |
Water or FONTECLEAN 1921. The equipment must be cleaned immediately after use before the paint dries. |
EU VOC 2004/42/EC-限值 |
The Volatile Organic Compounds amount is 75 g/litre of paint.
VOC content of paint (thinned 10 % by volume) is 65 g/l |
|
健康安全等级 |
|
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets.
A health and safety data sheet is available on request from Tikkurila Oy.
For professional use only. |
|
- |
|