A very fast drying, gloss finishing paint. Suitable for interior and exterior metal surfaces and interior wooden surfaces.
Used for painting of transport equipment, furniture etc.
White and black.
The paint does not contain free formaldehyde and after drying it does not emit formaldehyde to the environment.
10.0 m2/l (30 μm).
Practical coverage depends on
the application method, painting conditions and the shape and roughness of the
surface to be coated.
Low pressure spraying
18 - 25 s
20 - 25 s
15 - 20 s
(100 - 120 g/m2)
Dust dry, after
- 20 min
Touch dry, after
and recoating times are related to the film thickness, temperature, the
relative humidity of the air and ventilation.
abt. 26 volume-%
1.0 - 1.1 kg / litre
The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the paint has to be over 18 ºC and the relative humidity of the air below 70 %. The surface temperature of steel has to be at least 3 ºC above the dew point.
Remove all impurities such as water-soluble salts, grease, oil etc. Dry the surface and remove all dust before painting. Prime metal surfaces with TEMAKEEP adhesion primer.
Dicco Thinner 1020.
EU VOC 2004/42/EC-限值
The Volatile Organic Compounds amount is 630 g/litre of paint.
Maximum VOC content in ready to use paint (thinned 30 % by volume) is 680 g/l.
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets.
A health and safety data sheet is available on request from Tikkurila Oy.