Tikkurila worldwide
产品使用说明书
12.06.2006

Diccoplast Primer

 
Tikkurila Industry 9L
描述 A two component acid catalysed primer.
产品特性 A fast drying primer with good filling and sanding properties.
推荐用途 Suitable for furniture, doors and other similar wooden and fibre board surfaces indoors.

技术参数
色彩类别 White TVT 0201 and black TVT 0202.
光泽组别 哑光
排放等级 Fulfils the requirements of DIN-norm 55 666, formaldehyde content max. 0.12 mg/m3 air.
涂布率

Recommended spreading amounts (unthinned)

Theoretical coverage

wet / one layer

theoretical dry film thickness

 

 135 g/m2

50 µm

10 - 11 m2/l


Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
混合比例 Base 100 parts by volume 694-series
Hardener 10 parts by volume 006 2098
涂刷方法

Application technique             

Viscosity DIN4

Low pressure spraying

18 - 25 s

Airless spraying

25 - 30 s

适用期 48 hours.
干燥时间

(110 - 120 g/m2)

50 ºC

70 ºC

IRM

Dry to sand, after

30 - 40 min

20 - 30 min

2 - 3 min

Stacking temperature below 35 ºC.

 

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Solids volume abt. 54 volume %, 72 weight %.
密度 1,4 kg/l.

使用说明
施工条件 The surface to be painted has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the paint has to be over 18 ºC and the relative humidity of the air below 70 %.
处理 Stir the paint carefully before use. Add 10 volume % of Hardener 006 2098. Thin the paint to the viscosity required. Do not use iron containers as mixing container. Instead use plastic, enamel or acid resistant steel containers. In case the paint mixture is used on the next day, add at least an equal amount of fresh paint mixture.
工具清洗 Thinner 1027 or 1033.
EU VOC 2004/42/EC-限值 The Volatile Organic Compounds amount is 390 g/litre of paint.
Maximum VOC content in ready to use paint (thinned 20 % by volume) is 480 g/l.

健康安全等级
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.
 
-


返回