Tikkurila worldwide

Merit Elastic 50

Tikkurila Industry 9L
描述 A two component acid catalyzed lacquer.
产品特性 A lacquer with good filling properties for exterior use.
推荐用途 Recommended for wooden window frames and front doors.

光泽组别 半光

5 - 6 m2/l (100 μm).

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
混合比例 Lacquer 100 parts by volume 005 2797
Hardener 10 parts by volume 006 2098

Application technique

Viscosity DIN4

Low pressure spraying

16 - 20 s

Airless spraying

18 - 25 s

适用期 2 days

(110 - 120 g/m2)

50 ºC

70 ºC

Dry to sand, after

45 - 60 min

30 - 40 min

Dry to stack, after

60 - 70 min

40 - 50 min

Stacking temperature below 35 ºC.


Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Solids volume abt. 52 % by volume, 59 % by weight
密度 1.0 kg/l
产品编号 005 2797

施工条件 The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the lacquer has to be over 18 ºC and the relative humidity of the air below 70 %.
喷面漆清漆 Stir the lacquer carefully. Add 10 % by volume Hardener 006 2098 or Hardener 006 2093. Thin the paint to the viscosity required. Do not use iron containers as mixing container. Instead use plastic, enamel or acid resistant steel containers. In case the lacquer mixture is used on the next day, add at least an equal amount of fresh mixture.
工具清洗 Thinner 1027 or 1033.
EU VOC 2004/42/EC-限值 The Volatile Organic Compounds amount is 410 g/litre of paint.
Maximum VOC content in ready to use paint (thinned 20 % by volume) is 495 g/l.

Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.