Merit Jahti 20, 30, 80
|
|
描述 |
A one component urethane alkyd lacquer containing UV-protective agent. |
产品特性 |
Wooden surfaces both indoors and outdoors. |
推荐用途 |
Recommended for boats, floors, doors, windows and other wooden surfaces. |
|
技术参数 |
特性 |
Excellent resistance to abrasion. Excellent resistance to all ordinary cleaning detergents, SFS 3755. Good resistance to solvents: gasoline, turpentine, white spirit and methylated spirits. Does not resist e.g. thinner. Resists lubricating oils and greases, animal and vegetable fats. |
光泽组别 |
半哑光, 半光 和 光 |
排放等级 |
The paint does not contain free formaldehyde and after drying it does not emit formaldehyde to the environment. |
涂布率 |
4 - 6 m2/l (100 μm).
Practical coverage depends on the application method, painting
conditions and the shape and roughness of the surface to be coated. |
涂刷方法 |
Brush or spray. In airless spray nozzle 0.009" - 0.013" (0.230 -
0.330 mm) and thinning 0 - 10 vol-%. |
干燥时间 |
|
23 ºC
|
Dust dry, after
|
2 h
|
Dry to handle, after
|
6 h
|
Recoatable, after
|
24 h
|
Fully cured and durability properties reached within 2 weeks.
|
Drying and recoating times are
related to the film thickness, temperature, the relative humidity of the air
and ventilation.
|
Solids volume |
abt. 49 volume %, 56 weight % |
密度 |
0.92 kg/l |
产品编号 |
005 0090, 005 0091 and 005 0110 |
|
使用说明 |
施工条件 |
The surface to be treated has to be dry i.e. the moisture content of the timber has to be below 20 %. During application and drying the temperature of the air has to be at least + 5 ºC and the relative humidity of the air below 80 %. Do not apply the lacquer under direct sunlight or during moist and cold weather. Time varnishing so that the lacquer film has enough time to dry before the evening dew. |
准备 |
New untreated surfaces: Remove dirt and dust. Prime outdoor surfaces with Valtti Base Priming Oil. Wash finewood surfaces with Thinner 1054.
Previously treated surfaces: Wash the surface with FONTECLEAN AL detergent and rinse thoroughly with water. Remove old loose lacquer with scraper. Sand the whole surface and remove sanding dust. |
喷面漆清漆 |
Stir the lacquer carefully before use. For priming new untreated surfaces thin the lacquer about 20 - 40 % with Thinner 1054. Brush evenly a thin layer 2 - 3 times. Thin top laqcuer 0 - 20 % if necessary. Varnish previously treated surfaces directly with unthinned lacquer 1 - 2 times. Sand the surface lightly after each coat.
Note! Priming of exterior objects must always be done with high gloss MERIT JAHTI. |
工具清洗 |
Thinner 1054. |
EU VOC 2004/42/EC-限值 |
The Volatile Organic Compounds amount is 390 g/litre of paint.
Maximum VOC content in ready to use paint (thinned 20 % by volume) is 514 g/l. |
|
健康安全等级 |
|
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets.
A health and safety data sheet is available on request from Tikkurila Coatings Oy. |
|
- |
|