Tikkurila worldwide


Tikkurila Industry 9L
描述 A transparent priming oil.
产品特性 Wooden surfaces. Contains effective anti-rot and anti-mould agents.
推荐用途 Window frames, front doors, wall boards, log cabins etc.

色彩类别 Clear.
光泽组别 哑光

8 - 10 m2/l (100 μm).

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.

Application technique

Viscosity DIN4

Dip coating

delivery viscosity


delivery viscosity


delivery viscosity


(110 - 120 g/m2)

+ 20 ºC

Dry to handle, after

6 - 12 h

Dry to handle, in stack, after

24 h

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Solids volume abt. 8 % by volume, 10 % by weight.
密度 0.84 kg/l
产品编号 005 0840

施工条件 The surface to be treated has to be clean and dry. The moisture content of the wood should be below 20 %. During application and drying the temperature of the air, the surface to be treated and the oil has to be over + 5 ºC and the relative humidity of the air below 80 %.
处理 Stir the oil well. The product is ready for use. If needed it can be thinned with Thinner 1054.
工具清洗 Thinner 1054.
EU VOC 2004/42/EC-限值 The Volatile Organic Compounds amount is 760 g/litre of oil.
Maximum VOC content in ready to use oil (thinned 10 % by volume) is 765 g/l.

Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.