 |
产品使用说明书 13.06.2006 |
|||||||||
Pinjasol Color |
 |
|||||||||
| 描述 | A transparent priming oil. | |||||||||
| 产品特性 | Wooden surfaces. Contains effective anti-rot and anti-mould agents. | |||||||||
| 推荐用途 | Window frames, front doors, wall boards, log cabins etc. | |||||||||
| 技术参数 | ||||||||||
| 色彩类别 | Clear. | |||||||||
| 色卡 | Limited range of colours according to Valtti Color Card. | |||||||||
| 光泽组别 | 半哑光 | |||||||||
| 涂布率 |
8 - 10 m2/l (100 μm). Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated. |
|||||||||
| 涂刷方法 |
|
|||||||||
| 干燥时间 |
Note! The shades made from C-base will dry slower. Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation. |
|||||||||
| Solids volume | abt. 11 % by volume, 14 % by weight | |||||||||
| 密度 | 0.82 kg/l (clear) | |||||||||
| 产品编号 | 292 series | |||||||||
| 使用说明 | ||||||||||
| 施工条件 | The surface to be coated has to be clean and dry. The moisture content of the wood should be below 20 %. During application and drying the temperature of the air, the surface to be treated and the oil has to be over + 5 ºC and the relative humidity of the air below 80 %. | |||||||||
| 处理 | Stir the oil carefully. The product is ready for use. If needed it can be thinned with Thinner 1054. | |||||||||
| 工具清洗 | Thinner 1054. | |||||||||
| EU VOC 2004/42/EC-限值 | The Volatile Organic Compounds amount is 730 g/litre of oil.
Maximum VOC content in ready to use oil is 730 g/l. |
|||||||||
| 健康安全等级 | ||||||||||
| Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy. | ||||||||||
| - | ||||||||||
