Tikkurila worldwide
产品使用说明书
25.05.2007

Merit Jahti 20, 30, 80

 
Tikkurila Industry 9L
描述 A one component urethane alkyd lacquer containing UV-protective agent.
产品特性 Wooden surfaces both indoors and outdoors.
推荐用途 Recommended for boats, floors, doors, windows and other wooden surfaces.

技术参数
特性 Excellent resistance to abrasion. Excellent resistance to all ordinary cleaning detergents, SFS 3755. Good resistance to solvents: gasoline, turpentine, white spirit and methylated spirits. Does not resist e.g. thinner. Resists lubricating oils and greases, animal and vegetable fats.
光泽组别 半哑光, 半光 和 光
排放等级 The paint does not contain free formaldehyde and after drying it does not emit formaldehyde to the environment.
涂布率

4 - 6 m2/l (100 μm).

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
涂刷方法

Brush or spray. In airless spray nozzle 0.009" - 0.013" (0.230 - 0.330 mm) and thinning 0 - 10 vol-%.

干燥时间

 

23 ºC

Dust dry, after

2 h

Dry to handle, after

6 h

Recoatable, after

24 h

Fully cured and durability properties reached within 2 weeks.


Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Solids volume abt. 49 volume %, 56 weight %
密度 0.92 kg/l
产品编号 005 0090, 005 0091 and 005 0110

使用说明
施工条件 The surface to be treated has to be dry i.e. the moisture content of the timber has to be below 20 %. During application and drying the temperature of the air has to be at least + 5 ºC and the relative humidity of the air below 80 %. Do not apply the lacquer under direct sunlight or during moist and cold weather. Time varnishing so that the lacquer film has enough time to dry before the evening dew.
准备 New untreated surfaces: Remove dirt and dust. Prime outdoor surfaces with Valtti Base Priming Oil. Wash finewood surfaces with Thinner 1054.

Previously treated surfaces: Wash the surface with FONTECLEAN AL detergent and rinse thoroughly with water. Remove old loose lacquer with scraper. Sand the whole surface and remove sanding dust.
喷面漆清漆 Stir the lacquer carefully before use. For priming new untreated surfaces thin the lacquer about 20 - 40 % with Thinner 1054. Brush evenly a thin layer 2 - 3 times. Thin top laqcuer 0 - 20 % if necessary. Varnish previously treated surfaces directly with unthinned lacquer 1 - 2 times. Sand the surface lightly after each coat.

Note! Priming of exterior objects must always be done with high gloss MERIT JAHTI.
工具清洗 Thinner 1054.
EU VOC 2004/42/EC-限值 The Volatile Organic Compounds amount is 390 g/litre of paint.
Maximum VOC content in ready to use paint (thinned 20 % by volume) is 514 g/l.

健康安全等级
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Coatings Oy.
 
-


返回