Tikkurila worldwide

Merit Jahti Pro 20, 80

Tikkurila Industry 9L
描述 One component polyurethane lacquer.
产品特性 Wooden surfaces both indoors and outdoors.
推荐用途 Recommended for floors, doors, windows and other wooden surfaces.

特性 Excellent resistance to wear and tear. Excellent resistance to all ordinary cleaning detergents. Good resistance to solvents: gasoline, turpentine, white spirit and methylated spirits. Does not resist e.g. thinner. Resists lubricating oils and greases, animal and vegetable fats. Can be tinted with Symphony colourants in the same way as Unica Super and also with Temaspeed colourants.
光泽组别 半光 和 光
排放等级 The lacquer does not contain free formaldehyde and after drying it does not emit formaldehyde to the environment.

4 - 6 m2/l (100 μm).

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
涂刷方法 Brush or spray. In airless spray nozzle 0.009" - 0.013" (0.230 - 0.330 mm) and thinning 0 - 40 vol-%.


23 ºC, RH 50%

Dust dry, after

2 h

Dry to handle, after

4 h

Recoatable, after

12 h

Fully cured and durability properties reached withn 2 weeks.

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Solids volume abt. 36 volume %, 44 weight %.
密度 0.9 kg/l
产品编号 900 2104 and 900 2105

施工条件 The surface to be treated has to be dry i.e. the moisture content of the timber has to be below 20 %. During application and drying the temperature of the air has to be at least + 5 ºC and the relative humidity of the air below 70 %. Do not apply the lacquer under direct sunlight or during moist and cold weather. Time varnishing so that the lacquer film has enough time to dry before the evening dew.
准备 New untreated surfaces: Remove dirt and dust. Prime outdoor surfaces with Valtti Base Priming Oil. Wash finewood surfaces with Thinner 1054.

Previously treated surfaces: Wash the surface with FONTECLEAN AL detergent and rinse thoroughly with water. Remove old loose lacquer with scraper. Sand the whole surface and remove sanding dust.
喷面漆清漆 Stir the lacquer well before use. For priming new untreated surfaces thin the lacquer about 20 - 40 % with Thinner 1054. Brush evenly applying a thin layer 2 - 3 times. Thin top lacquer 0 - 20 % if necessary. Varnish previously treated surfaces directly with unthinned lacquer 1 - 2 times. Sand the surface lightly after each coat.
工具清洗 Thinner 1054.
EU VOC 2004/42/EC-限值 The Volatile Organic Compounds amount is 500 g/litre of lacquer.
Maximum VOC content in ready to use lacquer (thinned 30 % by volume) is 568 g/l.

Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.