Tikkurila worldwide


Tikkurila Industry 9L
描述 Alkyd-based putty.
产品特性 For filling holes in interior and exterior wooden, wood fibre board, chip board and metal surfaces. The filler treated hole can be painted or varnished with water-borne, latex, alkyd, oil or catalysed paints.
推荐用途 Suitable for furniture, doors, windows, boats, vehicles etc.

特性 Easy to sand and scrape.
色彩类别 White.
涂布率 6 - 8 m2/l (100 μm).
涂刷方法 By spatula or spray.
干燥时间 Dried after 1 - 2 hours depending on layer thickness, temperature, relative humidity of the air, circulation of the drying air and material treated.
Solids volume abt. 71 % by volume, 87 % by weight.
密度 1.8 kg/l.
产品编号 007 2084

施工条件 The surface to be treated must be dry and the temperature of the air at least + 5 ºC and the relative humidity of the air below 80 %.
准备 New unpainted surfaces: Remove dirt, dust and loose material from the surface. Better adhesion in porous surfaces is achieved with JEHU Primer, thinned abt. 10 % with White spirit 1050.

Earlier painted surfaces: Wash the surface with FONTECLEAN AL detergent and rinse carefully with water. After the surface has dried remove the peeling paint layer with a scraper and sand the whole surface. Remove sanding dust.
处理 Apply with a spatula straight to wooden, wood fibre board, chipboard, metal surfaces and dried primer. Usually it is enough to apply putty only in holes, unevennesses and knags. At spray application thin with White spirit 1050. At spatula application thin if necessary.

COLONOL can be overcoated with alkyd or latex paints or even with primers, intermediate or top coats containing strong solvents.
工具清洗 White spirit 1050.
EU VOC 2004/42/EC-限值 The Volatile Organic Compounds amount is 240 g/litre of putty.

Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy. For professional use only.