Tikkurila worldwide

Dicco Color

Tikkurila Industry 9L
描述 A solvent borne light stain.
产品特性 Wooden surfaces indoors.
推荐用途 Recommended for furniture, doors and other wooden and fibre board surfaces indoors.

特性 Contains soluble, light resistant dyestuff. Can be used also to stain putty spots.
色卡 DICCO COLOR colour card. DICCO COLOR SERVICE tinting system.
排放等级 The stain does not contain free formaldehyde and after drying it does not emit formaldehyde to the environment.

Recommended spreading amounts (unthinned)

Theoretical coverage

wet / one layer

theoretical dry film thickness


 65 g/m2

5 µm

14 - 16 m2/l

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
稀释剂 , ,

Application technique


Viscosity DIN4



Delivery viscosity

Roller coater


Delivery viscosity

Dip coating


Delivery viscosity


(80 - 100 g/m2)

23 ºC

50 ºC

70 ºC


Recoatable, after

20 min

5 min

2 - 3 min

15 - 30 s

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Solids volume 1 - 10 % by weight, depending on the colour.
密度 0.90 kg / litre, depending on the colour.

施工条件 The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the stain has to be over 18 ºC and the relative humidity of the air below 70 %.
处理 Stir the stain carefully before use. The stain is ready for use. Different application methods may cause variations of the colour of the stain. The colour and intensity of the stain should be verified before applying large surfaces. Notice that different kinds of top lacquers can change the colour (Merit, Uvinol or Akvi). Also roughness of the sanding paper will affect on staining. Dicco Color can be thinned with Thinner 1027, 1033, 1034 or 1035, if necessary. Dicco Color stain can be mixed with Merit lacquers.
工具清洗 Thinner 1027, 1033, 1034 tai 1035.
EU VOC 2004/42/EC-限值 The Volatile Organic Compounds amount is 800 g/litre of stain.
Maximum VOC content in ready to use stain (thinned 10 % by volume) is 800 g/l.

Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.