Diccopur Primer HS
|
|
描述 |
Two component polyurethane primer. |
产品特性 |
A polyurethane primer with high-solids content for wooden surfaces indoors. Especially suitable for painting MDF-boards.
|
推荐用途 |
Recommended for furniture, doors and other wooden surfaces. |
|
技术参数 |
特性 |
Easy to apply, good filling properties and fast drying. |
色彩类别 |
White. |
光泽组别 |
哑光 |
排放等级 |
The paint does not contain free formaldehyde and after drying it does not emit formaldehyde to the environment. |
混合比例 |
Paint 100 parts by volume 007 1583
Hardener 35 parts by volume 007 1265 |
涂刷方法 |
Application technique
|
Thinning
|
Low pressure spraying
|
0 - 10 % Thinner 1069
|
Airless spraying
|
0 - 10 % Thinner 1069
|
Curtain Coater
|
0 - 10 % Thinner 1069
|
|
适用期 |
7 hours |
干燥时间 |
(100 - 120 g/m2)
|
23 ºC
|
Dry to sand, after
|
1 - 2 h
|
Drying
and recoating times are related to the film thickness, temperature, the
relative humidity of the air and ventilation.
|
Solids volume |
54 weight-% |
密度 |
1.42 kg/litre |
产品编号 |
007 1583 |
|
使用说明 |
施工条件 |
The surface to be treated has to be clean and dry. During application and curing process the temperature of the air, the surface to be treated and the primer has to be at least 18 ºC and the relative humidity of the air below 70 %. |
涂刷 |
Stir the paint carefully. Add 35 % by volume Hardener 007 1265 and mix well. Thin the paint to the viscosity needed with Thinner 1069 (normal) or Thinner 1068 (slow). |
工具清洗 |
Thinner 1069. |
EU VOC 2004/42/EC-限值 |
The Volatile Organic Compounds amount is 520 g/litre of paint.
Maximum VOC content in ready to use paint (thinned 20 % by volume) is 699 g/l. |
|
健康安全等级 |
|
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets.
A health and safety data sheet is available on request from Tikkurila Oy. |
|
- |
|