Tikkurila worldwide

Merit Combi 25

Tikkurila Industry 9L
描述 A one component acid catalysed lacquer.
产品特性 A fast drying, easy to sand priming and finishing lacquer without aromatic solvents.
推荐用途 Recommended for furniture, doors and other similar wooden surfaces.

光泽组别 半哑光
排放等级 Fulfils the requirements of DIN-norm 55 666, formaldehyde content max. 0.12 mg/m3 air.

Recommended spreading amounts (thinned 10 %)

Theoretical coverage

wet / one layer

theoretical dry film thickness


 115 g/m2

30 µm

8 - 9 m2/l

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.

Application technique

Viscosity DIN4

Low pressure spraying

18 - 23 s

Airless spraying

25 - 30 s

Curtain coating

30 - 45 s

Dip coating

15 - 25 s


(110 - 120 g/m2)

50 ºC

70 ºC


 Dry to sand, after

30 min

10 - 15 min

2 - 3 min

Stacking temperature below 35 ºC.


Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Solids volume abt. 26 volume-%, 34 weight-%.
密度 0.9 kg/litre
储存 6 months
产品编号 005 2758

施工条件 The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the lacquer has to be over 18 ºC and the relative humidity of the air below 70 %.
喷面漆清漆 Stir the lacquer carefully before use. Thin to the viscosity required with Thinner 1035 or 1033. Do not use iron containers as mixing container. Instead use plastic, enamel or acid resistant steel containers.
工具清洗 Thinner 1035 or 1033.
EU VOC 2004/42/EC-限值 The Volatile Organic Compounds amount is 610 g/litre of paint.
Maximum VOC content in ready to use paint (thinned 20 % by volume) is 642 g/l.

Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.