Tikkurila worldwide

Merit Elektra 25, 35

Tikkurila Industry 9L
描述 Two component acid catalysed lacquer.
产品特性 Wooden surfaces indoors. Recommended especially for electrostatic spraying.
推荐用途 Suitable for lacquering of furniture, doors and other similar wooden surfaces.

特性 A thixotropic lacquer with good filling properties.
光泽组别 半哑光 和 半光
排放等级 Fulfils the requirements of DIN-norm 55 666, formaldehyde content max. 0.12mg/m3 air.

4 - 6 m2/l (100 μm).

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
混合比例 Lacquer 100 parts by volume 005 2740, 005 2744
Hardener 8 parts by volume 006 2093

Application technique

Viscosity DIN4

Low pressure spraying

18 - 23 s

Airless spraying

25 - 30 s

Electrostatic spraying

16 - 20 s

适用期 48 hours

(110 - 120 g/m2)

50 ºC

70 ºC

Dry to sand, after

30 - 40 min

20 - 30 min

Dry to stack, after

60 - 70 min

40 - 50 min

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Solids volume abt. 50 volume %, 57 weight %
密度 1.0 kg / litre
产品编号 005 2740 and 005 2744

施工条件 The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the lacquer has to be over 18 ºC and the relative humidity of the air below 70 %.
喷面漆清漆 Stir the lacquer carefully before use. Add 8 volume % of Hardener 006 2093. Thin the lacquer to the viscosity required. Let the mixture stabilize about half an hour and check the viscosity again. At normal spraying you can add 10 volume % of Hardener 006 2098 and thin with Thinner 1027 or 1033. Do not use iron containers as mixing container. Instead use plastic, enamel or acid resistant steel containers. In case the lacquer mixture is used on the next day, add at least an equal amount of fresh lacquer mixture.
工具清洗 Thinner 1027, 1033 or 1046.
EU VOC 2004/42/EC-限值 The Volatile Organic Compounds amount is 420 g/litre of paint.
Maximum VOC content in ready to use paint (thinned 20 % by volume) is 519 g/l.

Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.