Merit Rubin 25
|
|
描述 |
A two component acid catalysed lacquer. |
产品特性 |
A very fast drying lacquer. Suitable both for priming and top lacquering. |
推荐用途 |
Recommended for furniture, doors and other wooden surfaces. |
|
技术参数 |
色彩类别 |
Clear. |
光泽组别 |
半哑光 |
排放等级 |
When the substrate material (i.e. wood or board) and the glue used is in accordance with the E1-classification, the product fulfils the requirements of DIN-norm 55 666; formaldehyde content max. 0.12 mg/m3 air. |
涂布率 |
1 - 3 m2/l (100 µm).
Practical coverage depends on
the application method, painting conditions and the shape and roughness of the
surface to be coated. |
混合比例 |
Lacquer 100 parts by volume 005 2728
Hardener 5 parts by volume 006 2098 |
涂刷方法 |
Application technique
|
Viscosity DIN4
|
Low pressure spraying
|
18 - 23 s
|
Airless spraying
|
25 - 30 s
|
Flow coating
|
30 - 45 s
|
Dip coating
|
20 - 40 s
|
|
适用期 |
2 days |
干燥时间 |
(110 - 120 g/m²)
|
50 ºC
|
70 ºC
|
IRM
|
Dry to sand, after
|
15 min
|
8 min
|
2 - 3 min
|
Stacking temperature below 35 ºC.
Drying and recoating times are
related to the film thickness, temperature, the relative humidity of the air
and ventilation. |
Solids volume |
abt. 20 % by volume, 26 % by weight |
密度 |
0.92 kg / l |
产品编号 |
005 2728 |
|
使用说明 |
施工条件 |
The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the lacquer has to be over 18 ºC and the relative humidity of the air below 70 %. |
喷面漆清漆 |
Stir the lacquer carefully. Add 5 % by volume Hardener 006 2098. Thin the lacquer to the viscosity required with Thinner 1033 or 1035. At flow coating thinning is not needed. Do not use iron containers as mixing container. Instead use plastic, enamel or acid resistant steel containers. |
工具清洗 |
Thinner 1033 or 1035. |
EU VOC 2004/42/EC-限值 |
The Volatile Organic Compounds amount is 670 g/litre of paint.
Maximum VOC content in ready to use paint (thinned 20 % by volume) is 689 g/l. |
|
健康安全等级 |
|
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets.
A health and safety data sheet is available on request from Tikkurila Oy. |
|
- |
|