Tikkurila worldwide

Merit Sanding, Merit Sealer, Merit Sealer W

Tikkurila Industry 9L
描述 A one component acid catalysed lacquer.
产品特性 A fast drying priming lacquer, easy to sand. Merit Sanding has the best sanding properties. Contains UV-protective agent.
推荐用途 Recommended for furniture, doors and other similar wooden surfaces indoors.

特性 Merit Sanding and Merit Sealer maintain the natural light colour of the wood. Merit Sealer W whitewashes the surface.
光泽组别 哑光
排放等级 Fulfils the requirements of DIN-norm 55 666, formaldehyde content max. 0.12 mg/m3 air.

Recommended spreading amounts (unthinned)

Theoretical coverage

wet / one layer

theoretical dry film thickness


 125 g/m2

25 µm

7 - 8 m2/l

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.

Application technique

Viscosity DIN4

Low pressure spraying

18 - 23 s

Airless spraying

25 - 30 s

Curtain coating

30 - 45 s

Dip coating

20 - 40 s


(110 - 120 g/m2)

50 ºC

70 ºC


Dry to sand, after

20 min

10 min

3 - 5 min

Stacking temperature below 35 ºC.


Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Solids volume abt. 22 volume %
34 weight % (Merit Sealer 29 weight %).
密度 1,0 kg/l.
储存 6 months (23 ºC).
产品编号 005 2722, 005 2724 and 005 2726

施工条件 The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the lacquer has to be over 18 ºC and the relative humidity of the air below 70 %.
处理 Stir the lacquer carefully before use. Thin the lacquer to the viscosity required with Thinner 1033 or Thinner 1035. For curtain coating thinnig is not necessary. Do not use iron containers as mixing container. Instead use plastic, enamel or acid resistant steel containers.
工具清洗 Thinner 1033 or Thinner 1035.
EU VOC 2004/42/EC-限值 The Volatile Organic Compounds amount is 630 g/litre of paint.
Maximum VOC content in ready to use paint (thinned 20 % by volume) is 664 g/l.

Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.