Tikkurila worldwide

Uvinol 10, 20, 30

Tikkurila Industry 9L
描述 An UV-curing acrylic lacquer.
产品特性 Can be used both as a topcoat and a sealer for wood and fibre board.
推荐用途 -

特性 Good filling properties. Solvent and formaldehyde free.
色彩类别 Clear.
光泽组别 哑光, 半哑光 和 半光
排放等级 The lacquer does not contain free formaldehyde nor does it after drying emit formaldehyde to the environment.

10 - 11 m2/litre.

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.

Application technique

Viscosity DIN4

Roller coater

delivery viscosity

干燥时间 Required UV-energy: 500 mJ/cm2 (New American Calibration).
Solids volume abt. 100 % by volume, 100 % by weight.
密度 1.1 kg/litre
产品编号 900 2274, 900 1956 and 005 6849.

施工条件 The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the lacquer has to be over 18 ºC and the relative humidity of the air below 70 %.
处理 Stir the lacquer carefully before use. If necessary, the lacquer can be thinned with Acrylic thinner 999 0251.
工具清洗 Thinner 1034.
EU VOC 2004/42/EC-限值 The Volatile Organic Compounds amount is 0 g/litre of paint.
Maximum VOC content in ready to use paint (thinned 5 % by volume) is 0 g/l.

Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.