Tikkurila worldwide


Tikkurila Industry 9L
描述 An UV-curing epoxy light putty.
产品特性 Solvent free putty with excellent filling properties. To be used as a first coat for wood and fibre board.
推荐用途 -

色彩类别 Clear.
排放等级 The putty does not contain free formaldehyde and after drying it does not emit formaldehyde to the environment.
涂布率 9 - 11 m2/l (100 μm).

Application technique

Viscosity DIN4

Light Putty Roller coating

Delivery viscosity

干燥时间 Required UV-energy

New American calibration

UV dose required

Dry to stack

400 mJ/cm2

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Solids volume 100 % by weight
密度 1.3 kg/litre
产品编号 990 1623

施工条件 The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the putty has to be over 18 ºC and the relative humidity of the air below 70 %.
处理 Stir the putty carefully before use. If necessary, the putty can be thinned with Acrylic thinner 999 0251.
工具清洗 Thinner 1034.
EU VOC 2004/42/EC-限值 The Volatile Organic Compounds amount is 25 g/litre of paint.
Maximum VOC content in ready to use paint (thinned 5 % by volume) is 25 g/l.

Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.