Tikkurila worldwide

Uvinol Sealer 850, Uvinol Sanding Sealer 851

Tikkurila Industry 9L
描述 UV-curing acrylic lacquer.
产品特性 Solvent free laqcuer with good filling properties. Recommended for sealing of wood and fibre board.
推荐用途 -

色彩类别 Clear.
光泽组别 半光
排放等级 The lacquer does not contain free formaldehyde and after drying it does not emit formaldehyde to the environment.

9 - 11 m2/l (100 μm).

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.

Application technique

Viscosity DIN4

Roller coating

delivery viscosity

干燥时间 Required UV-energy

New American calibration

UV dose required

Dry to stack, 005 6850

300 mJ/cm2

Dry to stack, 005 6851

300 mJ/cm2

Solids volume abt. 100 % by volume, 100 % by weight.
密度 1.1 - 1.2 kg/litre
产品编号 005 6850 and 005 6851

施工条件 The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the lacquer has to be over 18 ºC and the relative humidity of the air below 70 %.
处理 Stir the lacquer carefully before use. If necessary, the lacquer can be thinned with Acrylic thinner 999 0251.
EU VOC 2004/42/EC-限值 The Volatile Organic Compounds amount to 45 g/l (005 6850) and 25 g/l (005 6851) of paint.
The Volatile Organic Compounds amount is 100 g/litre of paint.
Maximum VOC content in ready to use paint (thinned 5 % by volume) is 45 g/l (005 6850 /25 g/l (005 6851).

Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.