Tikkurila worldwide


Tikkurila Industry 9L
描述 Waterborne putty for wood and wooden boards.
产品特性 For filling holes and scratches in wood and wooden boards. Recoatable both with solvent and waterborne products.
推荐用途 -

色彩类别 White.
排放等级 The putty does not contain free formaldehyde and after drying it does not emit formaldehyde to the environment.
涂刷方法 Spatula.

Thin filling layer can be sanded after abt. 15 - 30 min and deeper filling layer after 1 - 4  hours (23 ºC). At higher temperature curing will be faster.

Solids volume abt. 60 volume-% and 78 weight-%.
密度 1.8 kg/litre
储存 12 months (23 ºC)
产品编号 007 2000

施工条件 The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the putty has to be over 18 ºC and the relative humidity of the air below 70 %.
施工 Remove dirt and loose material from the surface. Fill deep holes preferably twice or several times. Sand the surface and remove sanding dust. The surface can be stained e.g. with DICCO or AKVI COLOR stains, varnished with e.g. AKVI or MERIT laqcuers and painted e.g. with AKVI or DICCOPLAST paints.
工具清洗 Water.
EU VOC 2004/42/EC-限值 The Volatile Organic Compounds amount is 40 g/litre of putty.

Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy. For professional use only.