Tikkurila worldwide
产品使用说明书
12.01.2006

Luminol 25 Paint

 
Tikkurila Industry 9L
描述 UV-curing, water-borne urethane polyester paint.
产品特性 Wooden surfaces indoors. Good resistance to abrasion.
推荐用途 Recommended for furniture, doors of kitchen fittings and other wooden surfaces.

技术参数
色彩类别 White (NCS S 0502-Y). Other colors by request.
光泽组别 半哑光
排放等级 The paint does not contain free formaldehyde and after drying it does not emit formaldehyde to the environment.
涂布率

4 - 5 m2/l (100 μm).

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
稀释剂
涂刷方法

Application technique

Viscosity DIN4

Low pressure spraying

25 - 40 s

Airmix or airless spraying

30 - 60 s

Curtain coating

40 - 60 s

干燥时间 (90 - 110 g/m2)

Dry to stack immediately after UV curing.

Flash-off 1 min / 23 ºC + 5 min / 50 ºC before UV-curing.

Flash-off time depends on the temperature and the efficiency of the ventilation.

Required UV-energy: 500 mJ/cm2 + 500 mJ/cm2. For proper curing of thicker layers, use both Gallium and Mercury lamps in UV-curing.
Solids volume abt. 43 % by volume, 54 % by weight.
密度 1.2 kg/litre
产品编号 960 1746

使用说明
施工条件 The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the paint has to be over 18 ºC and the relative humidity of the air below 70 %.
涂刷 Stir the paint carefully before use. Thin with water to the viscosity required.
EU VOC 2004/42/EC-限值 The Volatile Organic Compounds amount is 30 g/litre of paint.
Maximum VOC content in ready to use paint (thinned 10 % by volume) is 30 g/l.

健康安全等级
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.
 
-


返回