Tikkurila worldwide
产品使用说明书
16.01.2006

Pinja Oil

 
Tikkurila Industry 9L
描述 Water-borne impregnation agent.
产品特性 For priming wooden surfaces outdoors. Recommended to be overcoated with Pinjalac Solid, Akvi Flex or Pinja Pro. Impregnates well to wood and contains effective fungicides and anti-rot compounds.
推荐用途 -

技术参数
色彩类别 The product is not tinted.
排放等级 The impregnation agent does not contain free formaldehyde.
涂布率

0.5 - 2 m2/l (100 μm).

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
稀释剂
涂刷方法

Application technique

Viscosity DIN 4

Dipping

delivery viscosity

Low pressure spraying

delivery viscosity

干燥时间

(100 - 120 g/m2)

20 ºC

50 ºC

Dry to handle, after

2 h

1 h

Solids volume abt. 9 % by volume, 9 % by weight
密度 1.0 kg/litre
储存 6 months (23 ºC)
产品编号 385 0070

使用说明
施工条件 The surface to be treated has to be clean and dry. During application and drying the surface to be treated, the temperature of the air and the oil must be at least 18 ºC and the relative humidity of the air below 70 %.
处理 Stir the impregnation agent carefully before use and also after longer breaks.
成分混合 Detergent and water.
EU VOC 2004/42/EC-限值 The Volatile Organic Compounds amount is 15 g/litre of paint.
Maximum VOC content in ready to use product is 20 g/l.

健康安全等级
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.
 
-


返回