Tikkurila worldwide

Pinja Pro Primer

Tikkurila Industry 9L
描述 A water-borne alkyd primer.
产品特性 An all-round primer for smooth sawn timber. Contains agents against mould and weathering. Gives good protection for 6 - 10 months and is a good primer for either water-borne top coat or oil paint.
推荐用途 Suitable for priming of weatherboards.

色彩类别 White TVT 0301, iron oxide red 2931 and shades on the House Paint colour card.
色卡 TEMASPEED FONTE and SYMPHONY tinting systems.
光泽组别 哑光

Recommended spreading amounts (unthinned)

Theoretical coverage

wet / one layer

theoretical dry film thickness


 135 g/m2

30 µm

9 - 10 m2/l

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.

Application technique

Viscosity DIN4

Airless spraying

30 - 40 s


20 - 30 s

Vacuum application

50 - 60 s


(100 - 120 g/m2)

20 ºC

Dry to handle, loose timber, after

6 - 12 h

Dry to handle, in stack, after

24 h


3 - 8 min

Note! Dark shades made from C-base will dry slower.


Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Solids volume abt. 37 weight-%. (243 6001)
abt. 26 weight-%. (243 6003)
abt. 37 weight-%. (243 0301)
密度 1.13 - 1.20 kg/litre
产品编号 243 series

施工条件 The surface to be treated has to be clean and dry. The moisture content of sawn timber has to be below 20 %. The temperature of the air, the surface to be treated and the primer has to be at least 5 ºC and the relative humidity of the air below 80 %.
涂刷 Stir the primer carefully before use. Avoid flotation. At spray application the primer can be thinned 5 - 10 % with water if necessary. Choose the colour of the primer in accordance with the colour of the finishing paint. Finish the surfaces with PIKA-TEHO, VINHA, ULTRA or TEHO at the earliest after 24 hours from priming.
工具清洗 Water.
EU VOC 2004/42/EC-限值 The Volatile Organic Compounds amount is 8 g/litre of paint.
Maximum VOC content in ready to use paint (thinned 10 % by volume) is 8 g/l.

Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.