Tikkurila worldwide


Tikkurila Industry 9L
描述 A water-borne translucent wood stain.
产品特性 Suitable for wooden surfaces. Contains effective agents which retard mould growth and blue stain.
推荐用途 Window frames, exterior doors, walls, log cabins etc.

色彩类别 Clear
色卡 Valtti Color colour card.
排放等级 The wood stain does not contain free formaldehyde and after drying it does not emit formaldehyde to the environment.

10- 14m2/l

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.

Application technique

Viscosity DIN4

Dip coating

Delivery viscosity


Delivery viscosity


Delivery viscosity


Delivery viscosity


(80 - 100 g/m2)

23 ºC

Dry to handle, after

30 min

Drying time is dependent on the temperature and moisture content of the air.

Tinted Pinjacolor dries slower than the clear one.
Solids volume abt. 12 volume-%, 13 weight-%
密度 1.01 kg /litre (clear)
储存 6 months (23 ºC)
产品编号 316 serie

施工条件 The surface to be painted has to be clean and dry. The temperature of the air, the surface to be treated and the stain has to be at least 5 ºC and the relative humidity of the air below 80 %.
染色 Stir Pinjacolor carefully before use. The product is ready for use. If necessary it can be thinned with water. The best resistance against mould and blue stain is reached when Pinjacolor is applied unthinned or thinned max. 10 %. For temporary resistance Pinjacolor can be thinned 1:1 with water. Thinning weakens the protective qualities of Pinjacolor because the dry contents and active ingredient contents are reduced.
工具清洗 Water.
EU VOC 2004/42/EC-限值 The Volatile Organic Compounds amount is 30 g/litre of stain.
Maximum VOC content in ready to use stain (thinned 10 % by volume) is 40 g/l.

Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.