Tikkurila worldwide
产品使用说明书
28.02.2007

Akvi Flex Primer

 
Tikkurila Industry 9L
描述 Water-borne acrylate primer.
产品特性 A fast drying, flexible primer for exterior use.
推荐用途 Suitable for wooden window frames and front doors.

技术参数
色彩类别 White TVT 0201.
光泽组别 哑光
排放等级 The primer does not contain free formaldehyde and after drying it does not emit formaldehyde to the environment.
涂布率

Recommended spreading amounts (thinned 5 vol-%)

Theoretical coverage

wet / one layer

theoretical dry film thickness

 

 150 g/m2

40 µm

8 - 9 m2/l

稀释剂
涂刷方法

Application technique

Viscosity DIN4

Low pressure spraying

delivery viscosity

Airless spraying

delivery viscosity

Curtain coating  

delivery viscosity

Electrostatic spraying

delivery viscosity

干燥时间

 100 - 120 g/m2

20 ºC

50 ºC

Dry to sand, after

1 h

30 min

Dry to stack, after

4 h

3 h

Solids volume abt. 35 volume %, 50 weight %.
密度 1.3 kg/litre.
储存 6 months (+23 ºC).
产品编号 006 5000

使用说明
施工条件 The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the primer has to be over 18 ºC and the relative humidity of the air below 70 %.
涂刷 Stir the primer carefully before use. Avoid flotation. For spray application thin the primer 5 - 15 % with water.
工具清洗 Vesi
EU VOC 2004/42/EC-限值 The Volatile Organic Compounds amount is 60 g/litre of paint. Maximum VOC content in ready to use paint (thinned 15 % by volume) is 70 g/l.

健康安全等级
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.
 
-


返回