Tikkurila worldwide

Akvi Wood Stain

Tikkurila Industry 9L
描述 Fast drying water-borne wood stain for wooden surfaces.
产品特性 Wood outdoor surfaces
推荐用途 Suitable for wooden window frames, front doors, panels etc.

特性 Contains efficient agents which prevent the growth of mould and blue stain.
色彩类别 Clear. AKVI TONE and TEMASPEED FONTE tinting according to the Translucent Wood Finishes Colour Card.

Recommended spreading amounts (unthinned)

Theoretical coverage

wet / one layer

theoretical dry film thickness


 80 g/m2

10 µm

12 - 14 m2/l

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.

Application technique

Viscosity DIN4

Dip coating

Delivery viscosity


Delivery viscosity


Delivery viscosity


 (100 - 120 g/m2)

20 ºC

50 ºC

Dry to sand, after

10 - 60 min

5 - 20 min

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Solids volume abt. 10 % by volume, 11 % by weight.
密度 1.0 kg/litre.
储存 12 months (+23 ºC).
产品编号 314 6909

施工条件 The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the stain has to be over 18 ºC and the relative humidity of the air below 70 %.
处理 Stir the stain carefully before use. Avoid flotation. Thin with water if necessary. Let the product settle down for a while before use.
工具清洗 Water
EU VOC 2004/42/EC-限值 The Volatile Organic Compounds amount is 30 g/litre of paint. Maximum VOC content in ready to use paint (thinned 4 % by volume) is 50 g/l.

Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.