Tikkurila worldwide
产品使用说明书
15.06.2006

Akvi Lasyr

 
Tikkurila Industry 9L
描述 A water-borne stain.
产品特性 Wooden indoor surfaces
推荐用途 A semi-opaque stain for furniture, doors, doors of kitchen fittings and other wooden surfaces indoors.

技术参数
色彩类别 Shades on the Valtti Color and Lacquer colour cards. TEMASPEED FONTE tinting.
排放等级 The stain does not contain free formaldehyde and after drying it does not emit formaldehyde to the environment.
涂布率

1 - 2 m2/l (100 μm) depending on the colour.

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
稀释剂
涂刷方法

Application technique

Viscosity DIN4

Low pressure spraying

Delivery viscosity

Airless spraying

Delivery viscosity

干燥时间

(40 - 100 g/m2) Dry to handle after about 30 minutes at room temperature.

 

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Solids volume 15 - 25 % by weight.
密度 1.0 - 1.1 kg/litre.
产品编号 312 serie

使用说明
施工条件 The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the stain has to be over 18 ºC and the relative humidity of the air below 70 %.
染色 Stir the stain very carefully before use. Stir also after breaks during working day. The stain is ready for use. Thin with water if necessary.
Different application methods and kinds of wood may result in variations of the shades of the stain. Colour and intensity of the stain should be verified before applying.
EU VOC 2004/42/EC-限值 The Volatile Organic Compounds amount is 20 g/litre of paint. Maximum VOC content in ready to use paint (thinned 10 % by volume) is 30 g/l.

健康安全等级
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.
 
-


返回