Tikkurila worldwide

Akvi Surf-O

Tikkurila Industry 9L
描述 Water-borne acrylate primer.
产品特性 Wooden surfaces in interior premises.
推荐用途 Suitable for furniture, doors, mouldings and other wooden surfaces in interior premises.

特性 A water-borne, fast drying primer with good sanding properties. Recoatable either with water-borne or solvent-borne products.
色彩类别 White
光泽组别 哑光
排放等级 The paint does not contain free formaldehyde and after drying it does not emit formaldehyde to the environment.

Recommended spreading amounts (unthinned)

Theoretical coverage

wet / one layer

theoretical dry film thickness


 135 g/m2

40 µm

10 - 11 m2/l


Application technique

Viscosity DIN4

Low pressure spraying

40 - 80 s

Airless spraying

40 - 80 s


 (100 - 120 g/m2)

20 ºC

50 ºC

70 ºC


Dry to sand, after

30 - 60 min

5 - 15 min

2 - 10 min

1 - 2 min

Solids volume abt. 42 volume-%, 60 weight-%.
密度 1.4 kg/litre.
储存 6 months (+23 ºC)
产品编号 006 5021

施工条件 The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the primer has to be over 18 ºC and the relative humidity of the air below 70 %.
涂刷 Stir the primer carefully before use. Avoid flotation. Thin the primer with water or Akvi Thinner if necessary.
EU VOC 2004/42/EC-限值 The Volatile Organic Compounds amount is 50 g/litre of paint. Maximum VOC content in ready to use paint (thinned 10 % by volume) is 100 g/l.

Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.