Tikkurila worldwide
产品使用说明书
24.04.2006

Akvi Topas 20, 40

 
Tikkurila Industry 9L
描述 Waterborne polyurethane-acrylate lacquer.
产品特性 A fast drying and durable waterborne laqcuer for high demands in interior use.
推荐用途 Suitable for furniture, doors, mouldings, floors and other wooden surfaces.

技术参数
光泽组别 半光 和 半哑光
排放等级 The lacquer does not contain free formaldehyde and after drying it does not emit formaldehyde to the environment.
涂布率

Recommended spreading amounts (unthinned)

Theoretical coverage

wet / one layer

theoretical dry film thickness

 

 120 g/m2

40 µm

8 - 9 m2/l

稀释剂
涂刷方法

Application technique

Viscosity DIN4

Low pressure spraying

30 - 60 s

Airless spraying

30 - 60 s

Electrostatic spraying

30 - 60 s

干燥时间

 (100 - 120 g/m2)

20 ºC

50 ºC

70 ºC

IRM

Dry to sand, after

20 - 60 min

5 - 15 min

2 - 5 min

2 - 3 min


Stacking temperature below 35 ºC.


Solids volume Abt. 32 % by volume, 34 % by weight.
产品编号 005 3868 and 005 3869

使用说明
施工条件 The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the lacquer has to be over 18 ºC and the relative humidity of the air below 70 %.
处理 Stir the lacquer carefully before use. Avoid flotation. For spray application thin the lacquer with water or Akvi Thinner if necessary.
工具清洗 Water
EU VOC 2004/42/EC-限值 The Volatile Organic Compounds amount is 130 g/litre of lacquer. Maximum VOC content in ready to use lacquer (thinned 10 % by volume) is 150g/litre.

健康安全等级
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.
 
-


返回