Tikkurila worldwide


Tikkurila Industry 9L
描述 Waterborne special putty for wooden surfaces.
产品特性 For filling holes in wooden boards and solid wood indoors. Recoatable both with water-borne or solid-based products. Especially suitable for putty machine applications.
推荐用途 -

色彩类别 White
排放等级 The putty does not contain free formaldehyde and after drying it does not emit formaldehyde to the environment.
涂布率 5 - 7 m2/l (100 μm).
稀释剂 Akvi 稀释剂 和 水
涂刷方法 Putty machine or spatula.

Thin filling layer can be sanded after abt. 30 - 60 min and deeper filling layer after 1 - 4 hours (23 ºC). In higher temperatures curing will be faster.

Solids volume abt. 58 % by volume, 76 % by weight.
密度 1.7 kg/l
储存 12 months (23 ºC)
产品编号 007 2072

施工条件 The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the putty has to be over 18 ºC and the relative humidity of the air below 70 %.
处理 Remove dirt, dust and loose material from the surface. If necessary thin with water or Akvi Thinner and apply. Fill deep holes preferably twice or several times. Sand the surface and remove sanding dust.

The surface can be painted e.g. with AKVI or DICCOPLAST paints.
工具清洗 Water.
EU VOC 2004/42/EC-限值 The Volatile Organic Compounds amount is 65 g/litre of putty.
Maximum VOC content in ready to use putty (thinned 10 % by volume) is 120 g/l.

Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.