Tikkurila worldwide
产品使用说明书
11.01.2006

Colowood Wood Putty

 
Tikkurila Industry 9L
描述 Waterborne special putty.
产品特性 For filling holes in interior wooden surfaces.
推荐用途 Recommended for furniture, doors, panel walls and ceilings.

技术参数
特性 After the putty has dried it looks like untreated wooden surface (see colours).
色彩类别 Pine, knot of pine, birch, knot of birch, oak, knot of oak, beech, white and mahogany.
排放等级 The putty does not contain free formaldehyde and after drying it does not emit formaldehyde to the environment.
涂布率 6 - 7 m2/l (100 μm).
稀释剂
涂刷方法 Spatula.
干燥时间

Thin filling layer can be sanded after abt. 4 hours and deeper filling layer after 24 hours.

Solids volume Abt. 67 % by volume, 83 % by weight.
密度 1.98 - 2.06 kg/litre
产品编号 007 2074, 2075, 2083, 2077, 2076, 2080, 2079, 2078 and 2081.

使用说明
施工条件 The surface to be treated must be dry, the temperature of the air at least 5 ºC and the relative humidity of the air below 80 %.
处理 Remove dirt from the surface. Brush away dust and loose material. Apply with a spatula. Thin with water, if necessary. Fill large holes preferably twice or several times. Sand the surface and remove sanding dust. The surface can be stained e.g. with DICCO COLOR wood stain. Varnish with e.g. AKVI TOPAS, AKVI COMBI or MERIT lacquers.
工具清洗 Water.
EU VOC 2004/42/EC-限值 The Volatile Organic Compounds amount is 20 g/litre of putty.
Maximum VOC content in ready to use putty is 20 g/l.

健康安全等级
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.
 
-


返回