Tikkurila worldwide

Akvilac 10, 20, 30, 40, 70

Tikkurila Industry 9L
描述 Waterborne acrylate lacquer.
产品特性 A fast drying all-round lacquer for interior use.
推荐用途 Suitable for furniture, panels, doors etc. wooden surfaces.

光泽组别 哑光, 半哑光, 半光 和 光
排放等级 The lacquer does not contain free formaldehyde and after drying it does not emit formaldehyde to the environment.

Recommended spreading amounts (unthinned)

Theoretical coverage

wet / one layer

theoretical dry film thickness


 120 g/m2

40 µm

8 - 9 m2/l

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
稀释剂 Akvi 稀释剂 和 水

Application technique

Viscosity DIN4

Low pressure spraying

40 - 70 s

Airless spraying

40 - 70 s

Curtain coating

40 - 70 s


(100 - 120 g/m2)

20 ºC

50 ºC


Dry to sand, after

15 - 30 min

5 - 15 min

3 min

Stacking temperature below 35 ºC.


Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Solids volume Abt. 33 % by volume, 35 % by weight.
密度 1.0 kg/litre
产品编号 005 3830, 005 3831, 005 3832, 005 3833 and 005 3834

施工条件 The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the lacquer has to be over 18 ºC and the relative humidity of the air below 70 %.
喷面漆清漆 Stir the lacquer carefully before use. Avoid flotation. The lacquer is recommended to use without thinning. If necessary thin the lacquer with water or Akvi Thinner.
工具清洗 Water.
EU VOC 2004/42/EC-限值 The Volatile Organic Compounds amount is 120 g/litre of lacquer.
Maximum VOC content in ready to use lacquer (thinned 10 % by volume) is 140 g/litre.

Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy.